|
Description |
: |
fjrigjwwe9r0MstBuySell:Description Sr.No Material Description Unit Quantity Offered Rates per unit (QR)
1. 0.6/1KV XLPE Insulated, PVC Separation Sheated, Galvanized Steel Wire Armoured (or Braid) and Flame Retardant PVC Outer Sheathed Cables.
2C x 50mm2 (0.6 /1 KV Cu/XLPE/SWA/PVC Mts 2200
3C x 2.5mm2 (0.6 /1 KV Cu/XLPE/SWA/PVC Mts 250
1C x 25mm2 (0.6 /1 KV Cu/PVC/ECC) Earthing Continuity Conductor. Mts 2200
2. Brass Nickel Plated Gland, Double Compression type with PVC Shroud Locknut, Star Washer & Nylon IP washer
M20 Each 28
M25 Each 18
½ NPT Each 10
3. Terminal Lug for LV cables
50mm2 Pin Type, insulated Each 34
2.5mm2 Pin Type Each 54
25mm2 Pin Type Each 18
4. Cable Markers
Letter A-Z, 0-9,+,-,/,,K-Type Markers (K65) Make :Critchley (1361) or Equivalent Reel 8
5. Local Distribution Board
6-ways SPN+E,120V, 16A SP Isolator, 1PH,2W,50Hz, 10kA, Local Distribution Board (FRA-PDB-101) as per Single Line Diagram, Class Zone- 2 11A T3, Type Exd, NEMA 4X/IP65, ATEX certified, surface-mounted, top& bottom entries, c/w all required accessories Nos. 8
6. Hot Dipped Galvanized Extra Heavy Duty Return Flange Cable Tray System c/w metal supports & other accessories
300W x 80H Straight Length (3 mts per piece) Each 82
150W x 80H Straight Length (3 mts per piece) Each 26
300W Straight Closed Cover (3 mts per piece) c/w clips & fastenings Each 82
150W Straight Closed Cover (3 mts per piece) c/w clips & fastenings Each 26
Coupling Set Each 165
Earth Continuity Connector Each 85
7. Instrumentation Cables
XLPE 1/OS/PVCIJ/SWA/PVCOJ/ 1P- 1.5 mm2 /(OS)FLR Mts. 350
8. Instrument Cable Glands
Cable Gland Eexd (IEC)SWA Cable / NPT ½ /BS NKL PLT/ Type PAP- 1(1/2 NPT) A2B3 Nos. 20
Gland Locknut:M20 Brass Nos. 20
Sealing Washer :M20 Nylon Nos. 20
9. Material for making supports for flow meter
Pipe SMLS STL SCH 80 2 DIA NPT (1.5 mts) Nos. 8
Angle Bar L2 x 2 Ό thick Mts. 20
Base Plate 200 x 200 mm Nos. 8
Bolt & Nut (M10 x55 STAINLESS STEEL) Nos. 40
Steel Angle (L-50x50x6T GALVD) Nos. 20
Expansion Anchor (M10 x 120L GALVD) Nos. 20
10. Sunshade for transmitter made of FRP Nos. 8
Dimensions and design as per attached drawing.
|
|
|
